Ganntrader 3.1 Version 13

 

Language

Citrix Receiver for Windows 3.1 Cumulative Update 1.zip

Welcome to our Video Library. This is very much a work in progress and we will be continually adding more and more videos to these sections. We strongly recommend that you invest some time in viewing the videos, as a bit of time invested here is going to pay back many times in the time saving features that you will be able to use again and again. Ganntrader 3.1 release 13- Software Vendors posting to Traders’ Resource are responsible for their own listing ( full disclaimer ). Questions or Comments? GannTrader Download, The following are some of the charts and styles you can access in GannTrader 3.1. August 13, 2019.

Software Solution Disclaimer

This package contains a software solution that has been replaced by a more recent version available for download from the Citrix support website (support.citrix.com). It is provided merely for your convenience. Citrix recommends applying the most up-to-date version of the software, which addresses the fix or enhancement being targeted. Later versions of the release may include multiple changes that address different areas including security vulnerabilities, code fixes, and enhancements. Installation of this software should only be performed on test or developmental environments. This software is not supported and is provided 'AS IS.' You are solely responsible for your selection and use of the software. Any reported issues will require the most current revision of the software (http://www.citrix.com/English/SS/supportThird.asp?slID=5107&tlID=1861652). Please visit our security site for additional security notices and information (support.citrix.com/securitybulletins ).

CITRIX MAKES NO REPRESENTATIONS OR WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE PROVIDED SOFTWARE SOLUTION. THE SOFTWARE SOLUTIONS ARE DELIVERED ON AN 'AS IS' BASIS WITH NO SUPPORT. YOU SHALL HAVE THE SOLE RESPONSIBILITY FOR ADEQUATE PROTECTION AND BACK-UP OF ANY DATA USED IN CONNECTION WITH THE SOFTWARE SOLUTION. IN NO EVENT SHALL CITRIX BE LIABLE FOR (i) SPECIAL, INDIRECT, DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR (ii) ANY OTHER CLAIM, DEMAND OR DAMAGES WHATSOEVER RESULTING FROM OR ARISING OUT OF OR IN CONNECTION WITH THE SOFTWARE SOLUTION, WHETHER AN ACTION IN CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR OTHERWISE.

Ganntrader 3.1 Version 13 12

Applicable Products

Ganntrader 3.1 Version 13 4

  • Receiver for Windows
  • XenApp Plug-in for Windows (32 64 Bit)

Ganntrader 3.1 Version 13 0

Hotfix name: Citrix Receiver for Windows 3.1 Cumulative Update 1
Filenames: CitrixReceiver.exe, CitrixReceiverEnterprise.exe, ReceiverEnterpriseMetadata.xml, ReceiverMetadata.xml
For: Citrix Receiver for Windows 3.1
Replaces: Citrix Receiver for Windows 3.1
Date: March, 2012
Language: English (US), German, French, Spanish, Japanese, Chinese (Traditional), Chinese (Simplified), Russian, Korean
Readme Version: 1.0

Readme Revision History

VersionDateChange Description
1.00March, 2012Initial release

If the Download link is not available on this page and you wish to obtain this limited distribution release, visit our support site at http://www.citrix.com/support and open a support case using your My Citrix credentials, or contact your reseller at http://www.citrix.com/partners/locator.

Ganntrader 3.1 Version 13 Software

Testing of this release was targeted only at the affected functionality, and regression and stress testing were minimal. Introduce this release to a test environment for evaluation before deploying it to a production environment.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CITRIX AND ITS SUPPLIERS MAKE AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND CITRIX AND ITS SUPPLIERS SPECIFICALLY DISCLAIM WITH RESPECT TO THIS RELEASE ANY CONDITIONS OF QUALITY, AVAILABILITY, RELIABILITY, SECURITY, LACK OF VIRUSES, BUGS OR ERRORS, OR SUPPORT AND ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER CITRIX, NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, MULTIPLE, PUNITIVE OR OTHER DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF DATA, LOSS OF INCOME, LOSS OF OPPORTUNITY, LOST PROFITS, COSTS OF RECOVERY OR ANY OTHER DAMAGES), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, AND WHETHER OR NOT FOR BREACH OF CONTRACT, NEGLIGENCE OR OTHERWISE, AND WHETHER OR NOT CITRIX, ITS SUPPLIERS, OR LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This document describes the issue(s) resolved by this release and includes installation instructions. For additional product information, see Citrix eDocs, the Citrix Product Documentation Library.

  • This limited release is based on Citrix Receiver for Windows 3.1 (13.1.0.89). Any known issues in Version 3.1 of the product, except for the specific issues resolved in this limited release, still apply.
  • Caution! After installing this version of Citrix Receiver, you can no longer downgrade to an earlier version.
  • Caution! This release may require you to edit the registry. Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

Known Issue(s) in this Release

When pressing Shift+F3 to disconnect a desktop session with the Desktop Viewer enabled and then reconnecting to the session, a dialog box appears, indicating that Filter Keys are no longer enabled. When this happens, click Yes to turn the keys back on, or No to proceed without using the keys. At any time in the session, you can enable the keys by pressing the Shift key for eight seconds. [BUG0270570]

This release introduces the following fixes that have not been previously released:

HDX MediaStreamShadowing
HDX Plug and PlaySmart Cards
KeyboardSpeedScreen
System Exceptions
Logon/AuthenticationTWAIN
PrintingUser Experience
Seamless WindowsUser Interface
Session/ConnectionMiscellaneous

  1. Server-Side Content Fetching can exhibit poor performance in restrictive WAN conditions due to the lack of flow control in the Flash Virtual Channel. This fix corrects the flow control for the Flash Virtual Channel and provides smooth playback of Flash objects. For information about configuring server-side content fetching, see http://support.citrix.com/proddocs/topic/xendesktop-als/hd-flash-configure-server-ad.html.

    Note : To address this issue in its entirety, you must install hotfixes that contain Fix #LA0686 for each of the following:

    • Citrix Receiver
    • Virtual Desktop Agent
    • HDX MediaStream for Flash

    [From RcvrForWin3.1_13.1.100][#LA0686]

Ganntrader 3.1 Version 13 Free

  1. After failed attempts to map certain USB devices into a virtual desktop session, the devices disappear from the Device Manager until you restart the endpoint.

    [From RcvrForWin3.1_13.1.100][#LA0954]

3.1

  1. Hotkeys - for example, the Ctrl+F1 combination - do not work in virtual desktop sessions if the Desktop Viewer is enabled.

    To enable this fix:

    1. Set the following registry key:
      • On 32-bit Windows:
        HKEY_LOCAL_MACHINESOFTWARECitrixICA ClientEngineLockdown ProfilesAll RegionsLockdownClient EngineHot Keys
        Name: AllowHotkey
        Type: REG_SZ
        Data: 1
      • On 64-bit Windows:
        HKEY_LOCAL_MACHINESOFTWAREWow6432NodeCitrixICA ClientEngineLockdown ProfilesAll RegionsLockdownClient EngineHot Keys
        Name: AllowHotkey
        Type: REG_SZ
        Data: 1
    2. Add the following entry to the [Application] section of the default.ica file on the Web server or the [WFClient] section of the appsrv.ini file in the user's profile directory of the client workstation:
      AllowHotkey=1

    [From RcvrForWin3.1_13.1.100][#LA0303]

  2. The Windows 7 Snap-to mouse pointer option (Mouse Properties > Pointer Options > Snap To) does not work in XenDesktop sessions using Citrix Receiver for Windows 3.0.

    [From RcvrForWin3.1_13.1.100][#LA1065]

  1. Pass-through authentication fails when launching a virtual desktop session with client selective trust enabled. To enable this fix, you must set the following registry key:

    HKEY_LOCAL_MACHINESOFTWARECitrixICA ClientClient Selective Trust Aux
    Name: EvidenceIcaServer
    Type: REG_DWORD
    Data: <non-zero value to enable server matching; 0 to disable server matching>

    [From RcvrForWin3.1_13.1.100][#257385]

  2. With the Desktop Appliance Lock installed, if multiple logon methods are specified on the Web Interface site and smart card authentication is specified as the preferred method, users cannot change their authentication method to connect to XenDesktop because no user interface is present for that purpose. With this fix, if no smart card is present in the reader, the default logon method switches to the first non-smart card method configured.

    [From RcvrForWin3.1_13.1.100][#LA0805]

  1. When running Dynamic Printer Discovery on a client against a server that does not support the feature and no printers are created on the client, published application launches can experience delays of up to 10 seconds.

    [From RcvrForWin3.1_13.1.100][#260823]

  2. Dynamic Printer Discovery can lead to a noticeable amount of additional network traffic as client devices monitor for printer changes. This fix applies a different API to prevent additional network traffic.

    [From RcvrForWin3.1_13.1.100][#LA0077]

  1. When client-side IME input method is enabled for the client (wfica32.exe /LocalIME:On), and a local, client-side IME language bar is enabled as well, the local, client-side IME language bar is not visible when the ICA session has focus.

    [From RcvrForWin3.1_13.1.100][#LA0133]

  2. This fix prevents seamless session windows from losing focus after a while. To enable it, you must add the following entry to the [WFClient] section of the appsrv.ini file and then restart the plug-in:

    Football manager 2012 patch 12.2.2 download. DisableReceiver=TRUE

    [From RcvrForWin3.1_13.1.100][#LA0773]

  1. Custom seamless applications can truncate child windows where the child windows overlap the parent window after retaking focus from a local window.

    [From RcvrForWin3.1_13.1.100][#236305]

  2. When you establish an RDP connection to the primary monitor of a dual-monitor endpoint device connected to a full-screen Virtual Desktop session that spans both screens and has the Desktop Viewer located on the secondary screen, the Desktop Viewer is not repositioned to the primary monitor within the RDP session.

    [From RcvrForWin3.1_13.1.100][#255026]

  3. Session sharing does not work when the setting 'SucConnTimeout' is read from the ICA file as opposed to from the registry.

    [From RcvrForWin3.1_13.1.100][#259645]

  4. With HDX MediaStream Multimedia Acceleration enabled, video fails to render on Windows XP desktops. A black square appears in place of the video instead.

    [From RcvrForWin3.1_13.1.100][#257405]

  5. Using the pass-through client to launch an application published on the same server as the client creates an additional session if the domain name contains a period (.).

    [From RcvrForWin3.1_13.1.100][#LA0297]

  6. With Session Reliability disabled and a session disconnect timer configured on the Virtual Desktop Agent as described in Knowledge Center article CTX117446, disconnecting a client session by clicking the Close (X) button of the session window or the Disconnect button on the Desktop Viewer causes the session to be treated as dropped rather than as gracefully disconnected. This prevents the session from assuming a disconnected state after the amount of time configured in the session disconnect timer. Instead, the session can linger in a Reconnecting state until Auto Client Reconnect stops listening for reconnection attempts. The default value for this is 300,000 ms (5 minutes).

    [From RcvrForWin3.1_13.1.100][#LA0756]

  7. Certain custom hotkeys do not work in Desktop Viewer sessions.

    [From RcvrForWin3.1_13.1.100][#260921]

  8. Copying and pasting content within Microsoft Excel 2010 running on Version 5.5 of the Virtual Desktop Agent causes the session to temporarily disconnect. The issue occurs when hovering the mouse pointer over the Paste Special menu option in Microsoft Excel 2010.

    [From RcvrForWin3.1_13.1.100][#LA0911]

  1. When using a custom Delivery Services Console as described in Knowledge Center article CTX126752, the following can be observed:

    • Client-side seamless application windows can get corrupted when moved or resized after the shadowing stops.
    • Mouse operations can be erratic when shadowing is stopped and then resumed; specifically, the mouse pointer appears to be parked in the top left corner of the session window and immediately returns to that general area after attempting to move it.

    Note: To address this issue in its entirety, you must install both a server and a client hotfix that contains Fix #258866.

    [From RcvrForWin3.1_13.1.100][#258866]

  2. When using remote assistance software to shadow a Windows XP XenDesktop desktop viewer session with an odd (non-even) horizontal resolution, the shadowing window is skewed.

    [From RcvrForWin3.1_13.1.100][#LA0313]

  1. With a smart card removal policy configured to disconnect a session upon removal of the smart card, Pnamain.exe can spike the server CPU when you remove the smart card from a pass-through session on the client device. Customers have also reported instances where disconnecting the session or closing the application will also cause Pnamain.exe to spike the CPU.

    [From RcvrForWin3.1_13.1.100][#237003]

  1. When enabling SpeedScreen Latency Reduction and both the Enable local text echo and Enable mouse click feedback server properties using the SpeedScreen Latency Reduction Manager tool, the mouse cursor can be missing from certain Web forms in high latency connections to the server.

    [From RcvrForWin3.1_13.1.100][#LA0811]

  1. In certain configurations involving Special Folder Redirection and a Citrix GPO configured to enable client drive mapping, the plug-in can exit unexpectedly.

    [From RcvrForWin3.1_13.1.100][#257318]

  2. With Browser Acceleration enabled, attempts to open a Sharepoint site with a GIF image on it can cause Windows Internet Explorer to exit unexpectedly. To address this issue in its entirety, you must install both a client and a server hotfix that contains Fix #LA0496.

    [From RcvrForWin3.1_13.1.100][#LA0496]

  3. During a XenDesktop or XenApp session, the wfica32.exe process can consistently consume up to 15% of the CPU on devices (physical or virtual) with an AMD CPU.

    [From RcvrForWin3.1_13.1.100][#LA0621]

  1. With TWAIN redirection enabled, a Cerner application fails to acquire images from a USB camera.

    [From RcvrForWin3.1_13.1.100][#252136]

  1. When using a roaming profile and launching a published application the second time, the icon changes to low resolution. Lineage2 anti lag patch.

    [From RcvrForWin3.1_13.1.100][#LA0099]

  2. Full-screen videos are stretched to fill the entire screen regardless of aspect ratio.

    [From RcvrForWin3.1_13.1.100][#LA0485]

  3. Copying content from a published application to a local application can be delayed by several seconds.

    [From RcvrForWin3.1_13.1.100][#LA1115]

  1. In certain configurations, the Connection Center link can be disabled in the Citrix Receiver menu, or display incorrect data.

    [From RcvrForWin3.1_13.1.100][#259193]

  2. Applying Group Policy/Client Selective Trust settings to restrict the HDX File Access/Microphone permissions does not cause the related options in the HDX tab of Desktop Viewer Preferences to be disabled. Setting the InstantiatedSecurityPolicyEditable registry key to 'false' as described in the procedure in Knowledge Center article CTX128792 disables those options in the Connection Center. After applying this fix, performing the same procedure also disables the options in the online plug-in user interface.

    [From RcvrForWin3.1_13.1.100][#LA0358]

  3. With the option selected to refresh the application list when resources are accessed on a Web Interface site, the application list can fail to refresh.

    [From RcvrForWin3.1_13.1.100][#LA1020]

  1. The value for HKEY_LOCAL_MACHINESOFTWARECitrixICA ClientEngineLockdown ProfilesAll RegionsLockdownNetworkProxyProxyType is case-sensitive; when the value is set to to 'none' (all lowrcase), the setting is ignored. This fix removes the case-sensitivity.

    [From RcvrForWin3.1_13.1.100][#259772]

  2. Version 3 of the Citrix Receiver for Windows can experience above normal CPU utilization (10-20%) on wfica32.exe when multiple ICA sessions are initialized concurrently.

    [From RcvrForWin3.1_13.1.100][#LA0522]

  3. Attempts to connect to published applications from the Web Interface through the Secure Gateway can fail.

    [From RcvrForWin3.1_13.1.100][#LA0445]

Flyff Version 13

  1. Download and extract the .zip archive.
  2. Follow the installation instructions at http://support.citrix.com/proddocs/topic/receiver-31a-windows/ica-client-install-packages.html.

For more information about the receiver, including licensing, client device system requirements, and installation instructions, see Citrix eDocs, the Citrix Product Documentation Library.