Respironics Tranquility 1700 Manual

Respironics BiLevel 1700 CPAP The Tranquility Bilevel is specifically designed to cater to the special needs of adult patients with Obstructive Sleep Apnea (OSA) who are not properly responding to continuous positive airway pressure therapy. Delivers two different pressure levels, IPAP and EPAP, for more comfortable therapy. The unit features a Compliance Monitor that records when the unit is. Page 5 The Tranquility Bilevel (Model 1700) system from Respironics, is a medical device that uses a blower. The blower is controlled to pro- vide two levels of pressure. The controller allows for the adjustment of the way the pressure changes from one level to the other. By clicking on the link, you will be leaving the official Royal Philips Healthcare ('Philips') website. Any links to third-party websites that may appear on this site are provided only for your convenience and in no way represent any affiliation or endorsement of the information provided on those linked websites. A global leader in sleep apnea treatment, Philips Respironics provides machines backed by research and built with advanced technology. Browse our large collection of Philips Respironics CPAP machines designed with you in mind and purchase your perfect match today.

Ventilators as stand-alone equipment, as part of anaesthesia machines, homecare ventilators (CPAP and BIPAP), airway humidifier and nebulizer.
Compressors for mechanical ventilators see the Medical Gas Supply section.
Nellcor, Mallinckrodt and Puritan Bennett might be the same.

Airox Legendair

Service manual
2.0 MB Download

Bear 1000

Service manual
3.5 MB Download

Bird Avian Transport

Service manual
3.8 MB Download

Bird 8400

Service manual
5.3 MB Download

Bird Mark 7

Service manual
2.7 MB Download

Bird TBird

Service manual
3.2 MB Download

Bird VIP Gold, Sterling 7

Service manual
5.6 MB Download

Breas PV101+, 102+

Service manual
1.5 MB Download

Breas PV 401

Service manual
3.0 MB Download

Breas PV 401-2

Service manual
5.3 MB Download

Breas PV 403

Service manual
9.8 MB Download

Breas 501

Service manual
8.3 MB Download

Bunnell Life Pulse

Service manual
1.4 MB Download

CardinalHealth Vela

Service manual
6.8 MB Download

CareFusion Avea

Service manual
9.9 MB Download

Datex Ohmenda 7000

Service manual
7.7 MB Download

Datex Ohmenda 7100

Service manual
2.3 MB Download

Datex Ohmenda 7800

Service manual
18.2 MB Download

Datex-Ohmeda 7900

Service manual (1997)
2.1 MB Download

Datex-Ohmeda 7900

Service manual (2004)
2.8 MB Download

Datex-Ohmeda Centiva/5

Service manual
3.0 MB Download

Datex Ohmeda Engstrom

Service manual
4.3 MB Download

DeVilbiss Pulo-Aide Nebulizer

Service manual
130 KB Download

Dräger Babylog 8000

Service manual
1.0 MB Download prohibited by Dräger. Support is not desired.

Dräger Babylog 8000

Service instructions
5.8 MB Download prohibited by Dräger. Support is not desired.

Dräger Breathing System Accessories

Product Catalog
850 KB Download prohibited by Dräger. Support is not desired.

Dräger Cato

Service manuals
370 KB Download prohibited by Dräger. Support is not desired.

Dräger CF 800

Service manuals
2.4 MB Download prohibited by Dräger. Support is not desired.

Dräger Evita

Service instructions
8.4 MB Download prohibited by Dräger. Support is not desired.

Dräger Evita 2 Dura

Service manual (turkish)
5.3 MB Download prohibited by Dräger. Support is not desired.

Dräger Evita 4, 2 dura

Compilation of service manuals
6.2 MB Download prohibited by Dräger. Support is not desired.

Dräger Evita XL

Service instructions
10.0 MB Download prohibited by Dräger. Support is not desired.

Dräger Fabius GS

Service manual
1.6 MB Download prohibited by Dräger. Support is not desired.

Dräger Fabius

technical documentation
2.6 MB Download prohibited by Dräger. Support is not desired.

Dräger Humidifier Fisher&Paykel MR850

Service manuals
722 KB Download prohibited by Dräger. Support is not desired.

Dräger Microvent

Service instructions
4.4 MB Download prohibited by Dräger. Support is not desired.

Dräger Monitoring Accessories

Product Catalog
1.8 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog

Service manual
880 KB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 1000

Service manual
2.3 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 1000

Service instructions
2.1 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 1000

Technische Dokumentation
2.3 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 2000

Service manual
3.8 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 2000

Service instructions
3.4 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 2000

Test procedures
240 KB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 2000

Service manual
2.3 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 2000 +

Service manual
980 KB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 3000

Service manual
2.8 MB Download prohibited by Dräger. Support is not desired.

Dräger Oxylog 3000

Service training manual
6.8 MB Download prohibited by Dräger. Support is not desired.

Drager Respi Care

Service manual (1998)
MB Download prohibited by Dräger. Support is not desired.

Dräger Respicare

Service manual (2000)
370 KB Download prohibited by Dräger. Support is not desired.

Dräger Respicare SW

Service manual
1.9 MB Download prohibited by Dräger. Support is not desired.

Dräger Savina

Service manual
3.8 MB Download prohibited by Dräger. Support is not desired.

Dräger Savina

Repair instructions
3.5 MB Download prohibited by Dräger. Support is not desired.

Dräger Savina

Service instructions
12.1 MB Download prohibited by Dräger. Support is not desired.

Dräger Savina

Technical documentation IPM
4.6 MB Download prohibited by Dräger. Support is not desired.

Dräger Savina 300

Technical documentation IPM
4.2 MB Download prohibited by Dräger. Support is not desired.

eVentMedical Inspiration

Service manual
4.7 MB Download

Emerson CoughAssist

Service manual
680 kB Download

Engström Carestation

Service manual
3.4 MB Download

Fisher&Paykal Humidifier HC-100

Technical manual
700 KB Download

Fisher&Paykal Humidifier MR-480,700,720,730

Service manual
1.3 MB Download

Fisher Paykel Humidifier MR-700-730

Circuit diagrams
1.8 MB Download

Fisher&Paykal Humidifier MR-850

Service manual
3.9 MB Download

Fisher Paykel Neopuff Infant Ventilator

Service manual
2.2 MB Download

GE iVent 201

Technical reference manual
4.7 MB Download

Hamilton Amadeus

Service manual
5.0 MB Download

Hamilton C2

Service manual
15.0 MB Download

Hamilton G5

Service manual
10.8 MB Download

Hamilton Galileo

Service manual
47.4 MB Download

Heinen & Löwenstein Leoni Baby Ventilator

Service manual
95 kB Download

Hirtz Hico-Ultrasonat 810

Service manual
5.9 MB Download

Impact Uni-Vent 731

Service manual
3.3 MB Download

Impact 754M Ventilation System

Service manual
6.1 MB Download

IMT Bellavista 1000

Service manual
4.1 MB Download

Lifecare PLV

Maintenance instruction
3.2 MB Download

Mallinckrodt 700

Service manual
60.7 MB Download

Maquet Servo 900 c,d,e

Service manual
2.9 MB Download

Maquet Servo-i

Service manual (Rev2)
1.6 MB Download

Maquet Servo-i

Service manual (Rev5)
5.5 MB Download

Maquet Servo-i

Technical overview
1.2 MB Download

Maquet Servo-i Computer Interface Emulator

Reference manual
480 KB Download

Maquet Servo-s

Service manual
2.9 MB Download

Nellcor 840

Service manual
13.4 MB Download

Nellcor Puritan Bennett LP6, LP10, LP20

Respironics Service manual
1.4 MB Download

Nellcor Puritan Bennett LP6, LP10, LP20

Technical manual
2.3 MB Download

Newport e360

Service manual
1.5 MB Download

Newport Breeze E150

Service manual
1.8 MB Download

Newport HT-70

Service manual
3.5 MB Download

Ohmeda 7800

Service manual
7.0 MB Download

Ohmeda 7900

Service manual
2.0 MB Download

Penlon AV-800

Service manual
1.0 MB Download

Philips Respironics V60

Service manual
5.9 MB Download

Philips Respironics V200

Service manual
5.9 MB Download

Pulmonetics LTV

Service manual
23.9 MB Download

Puritan Bennett 700

Service manual
58.3 MB Download

Puritan Bennett 800

Service manual
8.1 MB Download

Puritan Bennett 800

Circuit diagram
4.2 MB Download

Puritan Bennett 840

Service manual
15.5 MB Download

Puritan Bennett 840

Reference manual
7.5 MB Download

Puritan Bennett 7200

Technical manual
10.2 MB Download

Puritan Bennett Achieva

Service manual
1.4 MB Download

Puritan Bennett Knightstar 330

Service manual
1.7 MB Download

Respironics BIPAP

Service manual
6.8 MB Download

Respironics BIPAP Focus

Service manual
7.2 MB Download

Respironics BIPAP ST

Service manual
5.4 MB Download

Respironics BIPAP V60

Service manual
5.9 MB Download

Respironics BIPAP Vision

Service manual
9.3 MB Download

Respironics Esprit

Service manual
5.1 MB Download

Respironics ST 30

Calibration manual
1.3 MB Download

Respironics V60

Service manual (2009)
5.9 MB Download

Respironics V60, V60 Plus

Service manual (2019)
7.9 MB Download

Respironics Philips V200

Service manual
5.9 MB Download

Saime Eole 3

Service manual
20.2 MB Download

Saime Helia S

Service manual
305 KB Download

Siare Siaretron 1000, 1100, 3300

Service manual
11.2 MB Download

Respironics Tranquility 1700 Manual User

Siare Siaretron Srio S2

Service manual
1.2 MB Download

SLE 2000 HFO

Service manual
15.4 MB Download

Respironics Tranquility Bi-level 1700 Manuals

SLE 2000 Infant Ventilator

Service manual
5.4 MB Download

SLE 4000, 5000 Infant Ventilator

Service manual
14.2 MB Download

Siemens Servo 300, 300A

Service manual
2.0 MB Download

Siemens Servo 300

Compilation of service manuals
4.7 MB Download

Siemens Servo 900

Service manual
12.0 MB Download

Siemens Servo-i

Service manual
2.5 MB Download

Stephan Alia

Service manual
2.5 MB Download

Stephan ABV

Service manual
700 KB Download

Stephan ABV V1.1

Service manual
440 KB Download

Taema Osiris

Service manual
3.6 MB Download

Tecme GraphNet

Service manual
7.2 MB Download prohibited by Tecme. Support is not desired.

Ulco Integrus PSV

Service manual
1.7 MB Download

VersaMed iVent 201

Service manual
20.0 MB Download

Viasys Avea

Service manual Rev.B
9.1 MB Download

Viasys Avea

Service manual Rev.C
19.5 MB Download

Viasys Bear Club 750

Service manualRespironics Tranquility 1700 Manual
5.0 MB Download

Viasys Infant Flow M 675

Service manual
1.1 MB Download

Viasys Mk II Infant Flow

Service manual
2.1 MB Download

Viasys Vela

Service manual
5.0 MB Download

Weinmann Medumat

Service manual
20.0 MB Download

Weinmann Medumat Basic

Service manual
5.2 MB Download

Weinmann Medumat Easy CPR

Service manual
5.5 MB Download

Weinmann Medumat Easy

Service manual
4.0 MB Download

Weinmann Medumat Standard

Service manual
2.6 MB Download

Weinmann SomnoComfort 2

Service manual
6.0 MB Download

Weinmann SomnoSmart 2

Service manual
4.7 MB Download

Weinmann Ventimotion

Service manual
4.9 MB Download


Quick links to sections of this page:
Clinician Manuals available via email | How to ask for a Clinician Manual via email
Clinician Manuals available for download | Setup Instructions for common CPAP Machines
Instructions and Clinician Setup Manuals to help you change pressure settings on most any CPAP machine
by SuperSleeper, Apnea Board Administrator

There is a lot of talk about how it's 'illegal' for Sleep Apnea patients to adjust or change their own CPAP machine pressure settings; that only a licensed, certified or qualified technician, physician or clinician can do it.

First of all, I challenge anyone to show me any local, state or federal law that makes adjusting your own legally-obtained CPAP machine a crime, or even threatens punitive action for doing so. Go ahead, I double-dog dare ya. If you can show me such a law, I'll give you a one-year free membership on Apnea Board. Oh, wait... that's already free. Moving right along...

Yes, you must first have a prescription to obtain a CPAP machine - but after you OWN one, you are within your rights to do whatever you please with it, including using it as a leaf blower, running it over with the family car, or... (oh no!) - changing your own pressure settings.

Below is some excellent info regarding setting pressures on common CPAP machines.

DISCLAIMER & LEGAL NOTICE: BY USING THESE CPAP SETUP DIRECTIONS AND SETUP GUIDES, YOU UNDERSTAND THAT YOU ARE PERSONALLY ASSUMING ALL RISK FOR USING INFORMATION ON THIS WEB PAGE AND IN THESE DOCUMENTS AND WILL NOT HOLD APNEA BOARD, ITS MEMBERS, OWNERS, ADMINISTRATORS AND MODERATORS LIABLE FOR ANY PROBLEMS, DAMAGES, PHYSICAL HARM, (INCLUDING DEATH), MENTAL HARM OR ANY OTHER HARM THAT MAY COME TO YOU, YOUR FAMILY MEMBERS, FRIENDS, CO-WORKERS OR ANY OTHER PERSONS WHO MAY RECEIVE THIS INFORMATION FROM YOU. YOU MAY NOT USE, COPY OR DOWNLOAD THESE DOCUMENTS UNLESS YOU HAVE A LEGAL RIGHT TO DO SO UNDER ALL APPLICABLE U.S. LAWS. INFORMATION CONTAINED ON THIS WEB PAGE, APNEA BOARD FORUMS AND ON THE APNEABOARD.COM WEB SITE SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A QUALIFIED PHYSICIAN BEFORE SEEKING TREATMENT FOR ANY MEDICAL CONDITION, INCLUDING SLEEP APNEA. ALWAYS SEEK THE ADVICE OF A QUALIFIED PHYSICIAN BEFORE CHANGING PRESSURE ON ANY MEDICAL DEVICE, INCLUDING CPAP MACHINES.
FAIR USE NOTICE: This web site and associated forums contain copyrighted material, the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance the understanding of Sleep Apnea treatment and to advance the educational level of Sleep Apnea patients with regard to their health. We sometimes include the full text of articles and documents rather than a simple link because we have found that links frequently 'go bad' or change over time. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site and associated discussion forums is distributed without fee or payment of any kind to those who have expressed a prior interest in receiving the included information for research and educational purposes. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner.




Please Keep Reading

When it comes to our health, we need to realize that (contrary to the claims of some health care professionals)no one is looking out for your personal health as much as you. Apnea Board was created to promote 'patient empowerment'-- we believe patients are their own best primary care provider. You can and should be trusted with the knowledge of how to adjust pressure settings on your own CPAP machine. If you use common sense and take simple precautions, you can safely and properly fine-tune your CPAP settings to enhance the effectiveness of your treatment.

We're not providing medical advice here, so we recommend you consult with a qualified sleep doctor before making any changes to sleep apnea therapy. You should never change settings on your CPAP machine without first having a basic understanding of how to properly make such adjustments. CPAP pressures should be changed slowly, in small increments, over a long period of time, taking note of how you feel after each change.
For a detailed explanation of how to determine the optimum pressure on your CPAP machine, click here.

Getting into the clinician setup mode on your CPAP machine is pretty simple, really.
If you're not sure which CPAP model you have, please go to our CPAP Pictures Page to identify your machine.
If you'd like assistance or advice from fellow Sleep Apnea patients, please join the Apnea Board Forum and ask any question you like.

  • Section One is a list of brief instructions on how to enter the Clinician Setup Menu for common CPAP machines.
  • Section Two is a list of common CPAP Clinician Setup Manualsavailable via direct download.
  • Section Three is a list of CPAP Clinician Setup Manualsavailable through email only.

Please Keep Reading

Please help us...

Apnea Board is an educational web site and we survive on the kindness of our members. If you have benefited from our CPAP setup instructions, the manuals or the forum, please consider donating a small amount to help us pay for our increased bandwidth hosting costs.

We greatly appreciate your help!

If you would like to donate using a major credit card, please click on the 'DONATE' button below to use PayPal for your donation (you do not need a PayPal account to use your credit card):


Thanks much for anything you can do.
If you would rather donate by cash or check, please click here.


.

[GO BACK TO TOP OF PAGE]
SECTION ONE:


Clinician Setup Menu Instructions for Common CPAP Machines:

DeVilbiss IntelliPAP 2 CPAP (DV63 Standard Plus & DV64 AutoAdjust): you can enter the setup menu by simultaneously pressing the Blower ON/OFF button, the Ramp button and the Rotary Knob. The 3 buttons must be held down until the screen says 'Entering Clinician Menu'. For instructions with pictures, please CLICK HERE. To receive the full Clinician Manual via email, please refer to Section Three below.
Respironics REMstar Auto (older pre-2007 standard unit, not 'M' series, not the PR System One): you can enter the setup menu by holding down the Ramp button and both of the right and left arrow buttons under the display window, while plugging in the CPAP. The 3 buttons must be held down until the setup screen starts.
Respironics REMstar M Series (CPAP or BiPAP): Unplug the power cord from the back of the CPAP machine, then hold down both the left and right arrow keys while simultaneously plugging in the power supply. Once the device beeps twice, release the buttons. After you hear the two beeps, you'll see the word setup in the lower right corner of the LCD screen. When you select setup you'll be in the clinician's mode where you can adjust every feature of the CPAP machine, including the pressure setting.
Philips-Respironics PR System One (REMstar Auto, REMstar DS150, BiPAP ST, BiPAP AVAPS, BiPAP Auto with Bi-Flex, BiPAP Pro with Bi-Flex, REMstar Pro with C-Flex & REMstar Plus): For Setup Instructions with pictures, click here. Supply power to the device: first, plug the socket end of the AC power cord into the power supply. Then plug the pronged end of the AC power cord into an electrical outlet that is not controlled by a wall switch. Finally, plug the power supply cord's connector into the power inlet on the back of the device. Once the device is powered, the home screen appears (it is a large box on the screen with four little boxes you can select by turning the control wheel). Turn the wheel to toggle between the 4 options and highlight 'setup'. Once setup is highlighted press and hold both the control wheel and ramp button on the device for at least 5 seconds. You will hear a double beep and the provider mode screen will appear. Also, you should remove the smart card prior to making adjustments, otherwise it will revert to the previous settings. (note: setup manuals for the REMstar Auto, BiPAP Auto & REMstar Pro machines are available by email, below)
Philips-Respironics DreamStation Series Machines (DreamStation Auto BiPAP, DreamStation BiPAP Pro, DreamStation Auto CPAP, DreamStation CPAP Pro, & DreamStation CPAP): For Setup Instructions with pictures, click here. Supply power to the device: first, plug the socket end of the AC power cord into the power supply. Then plug the pronged end of the AC power cord into an electrical outlet that is not controlled by a wall switch. Finally, plug the power supply cord's connector into the power inlet on the back of the device. Once the device is powered, press and hold both the control dial and the Ramp button on the device for at least 5 seconds. You are now in Provider Mode. To adjust a setting, rotate the control dial to your desired menu option, then press the control dial to select that setting. Rotate the control dial to change the setting. Press the control dial again to save the change. Select the 'Home' icon to exit Provider Mode and return to Patient Mode. (note: setup manuals for these machines are available by email, below)

Philips-Respironics REMstar SE: Click HERE for instructions on how to enter the Clinician Setup Menu.
Respironics SleepEasy: Plug in the machine while simultaneously pressing the plus and minus buttons on top of the machine. The LCD shows the pressure setting along with an icon of a open padlock. To move between options, press the ramp button. The plus and minus buttons adjust the increments.
Respironics Solo LX : Click HERE for instructions on how to enter the Clinician Setup Menu.
Respironics REMstar Virtuoso: Click HERE for instructions on how to enter the Clinician Setup Menu.
Respironics BiPAP Auto SV & BiPAP ST (older gray colored model): Click HERE for instructions on how to enter the Clinician Setup Menu.
Respironics REMstar Lite: plug the cord into the AC outlet and leave the other end unattached to the machine. Then, firmly hold down both the ramp and power button while plugging the cord into the machine at the same time. When you do so, the 'unlock' icon appears and the blower starts up. You can then navigate through the menu to change pressures.
Puritan Bennett GoodKnight 420 Series: Make sure the CPAP machine is plugged in, then find the secret button beneath the 'Go' in the word GoodKnight which appears just above the LCD screen. Press the secret button and the Information Access button simultaneously for 2 or 3 seconds. The CPAP machine will now be in the provider setup mode. Press the Information Access button to cycle through the list of adjustable settings, and use the arrow buttons to make adjustments.
Invacare Polaris EX (and possibly other Invacare models): While in stand-by press and hold both up and down arrows for about 15 seconds. Press up arrow for setup. Use up and down arrows to adjust each setting. Press the large Invacare (enter) button to go to the next setting. If it asks you 'compliance yes/no?', select 'yes'. (complete manual via email is listed below)
Invacare Polaris LT(you will need a manometer to adjust pressure exactly): Open the top cover using a screwdriver; this will reveal two 'secret' UP and DOWN buttons. Turn the machine on and press both the UP and DOWN buttons simultaneously for 3-5 seconds until the pressure LED light turns on. To reduce pressure, push the DOWN button; to increase pressure, press the UP button. Use a manometer to adjust exact pressure output.
Fisher & Paykel HC 234: Enter programming mode by holding down the 'Ramp' (top) button and the 'Next' (Right arrow/bottom button) for three seconds. When you get into the pressure set mode you will first be able to set adjust altitude, which is indicated by a drawing of a mountain range on your screen. You can change or ignore this setting and then push the 'Next' (Right arrow/bottom button) to advance to pressure setting which will be indicated by the characters 'cm h20 ' on the screen. Use the Up and Down keys to change the pressure setting. Lastly, push the bottom button again to exit programming mode.
Fisher & Paykel HC 220 & 220LE: On the side of the machine where the power switch is, you should be able to see a little small cut-out shape like a square, or hidden door. Simply push and pull down and it should slide off, under that there is a black dial that you turn up or down to change the pressure. (note: the right dial, not the left). Right in front of the adjuster knob is an LCD window that will give you the current pressure setting.
Fisher & Paykel ICON Auto, Premo & Novo: Start from the 12 o'clock position of the Home Screen. Press and hold the button in the middle of the SmartDial, and use your other hand to turn the SmartDial in a clockwise direction until you return to the 12 o'clock postion. Do not release the Smart Dial button while turning. Turn the SmartDial back (counter clockwise) one position while still holding down the button and the settings in the Clinician Menu will appear. You can now release the SmartDial button. NOTE: The Clinician Menu will default back to the Patient Menu after 30 seconds, or if the unit is turned off at the power supply. You can manually exit the Clinician Menu by repeating the instructions to enter the menu.
2017 Fisher & Paykel SleepStyle Series:click here.
ResMed S8 Compact, S8 Elite, S8 AutoSet Vantage & AutoSet Spirit: Press the right and down arrows simultaneously for about 3 seconds until the word 'clinical' appears. Select Menu, then use the left and right arrows to cycle through the settings. Use the up and down arrows to make adjustments.
ResMed A10 Series (AirSense 10 AutoSet, AutoSet for Her, Elite, CPAP, AirCurve 10 VAuto, S, ST, ASV, & CS PaceWave): For Setup Instructions with pictures, click here. The 'dial' can be turned or pushed. The button below the screen with the house icon is called the 'home' button. To access the clinician menu, press the dial and the home buttons simultaneously for 3 seconds. The clinician menu will appear. Select parameter(s) you wish to modify with the dial (push down to select, turn to modify). When done, press the dial and home buttons for 3 seconds again, or find the 'exit clinical menu' option in the menus. (complete manual available via email, below)
ResMed S9 Series (S9 AutoSet, S9 Elite, S9 Escape Auto, S9 Escape, S9 VPAP S, S9 VPAP ST, S9 VPAP Auto & S9 VPAP Adapt): For Setup Instructions with pictures, click here. Plug in machine and turn the Push Dial until the device is showing the Home position (Home Icon illuminated). In Home position, press the Push Dial and the Setup Menu buttons down simultaneously for 3 seconds. The clinician menu will appear. Select parameter(s) you wish to modify with the Push Dial (push down to select, turn to modify). When done, select the Home choice again from the displayed menu, push down the Push Dial again and the adjustment is saved. (complete manual available via email, below)
ResMed VPAP II: For Setup Instructions, click here.
For the free ResScan and OSCAR can be seen in the Display. While still pressing the ramp-button press the humidifier button, until the pressure-setting-menu appears.
Weinmann SOMNOcomfort 2: Press the ramp-button until the display is clear (or 'A' is blinking if Automatic Mode is enabled). While still pressing the ramp-button press the humidifier button, until the pressure-setting-menu appears.
Weinmann Prisma series with buttons: When in clock mode, press and hold the rightmost buttons (menu and ramp) for a few seconds until MENU CLIN appears. Then press the + (settings) button.
Weinmann Prisma series with touch screen: Press and hold the 'info' icon for a few seconds, then choose 'login' to enter setup.
Breas PV10 CPAP: For Setup Instructions, click here.
Viasys Orion CPAP: Press both the plus ( + ) button and minus ( -) button simultaneously to get into the clinician setup menu. First set the ramp pressure values, then the ramp time. After these is the altitude setting (1 - 9 where 1=1,000 feet above sea level); to find your altitude click here. Next, set the standard pressure in increments of 0.5 cm/H20 of pressure.
Evo RemRest 900 Series: Turn on the machine, then turn off the machine. Immediately after that, simultaneously press both arrow buttons. While holding those 2 buttons down hit the power button to take you to the setup mode. Scroll through the menu using the arrow buttons until you get to the particular setting you want. To change the pressure use the up and down arrow buttons to change the levels. When done press the mode button to apply settings and then power off machine.
DeVilbiss 9000 series machines: Turn on the machine, then turn off the machine. Immediately after that, simultaneously press the down arrow button and the ramp buttons. While holding those two buttons down hit the power button to enter the setup mode. Scroll through the menu using the select button until you get to IPAP and EPAP settings. Use the up and down arrow buttons to change the levels. When done turn off the machine.
DeVilbiss RPM Bilevel: To unlock the prescription settings, make sure the blower is OFF (OFF should be shown on the display). While pressing the DELAY and DOWN buttons, press the ON/OFF button to start the blower. The prescription settings are now unlocked and can be changed using the UP and DOWN buttons on the keypad. Press the SELECT button to advance to the next setting. The first value displayed on the LCD will be the mode.
CareFusion PureSom CPAP: On the top of the machine there are four buttons. On the top left is the 'MENU' button, below that is the 'ON/OFF' button, on the right side there is an 'UP arrow' and a 'DOWN arrow'. Using the MENU button, advance to the pressure setting adjustment, then simultaneously depress the UP and DOWN arrows and the MENU button for at least one second until the display blinks, then release all buttons. You may advance the CPAP pressure in 0.5 cmH2O increments using the UP or DOWN arrows. Press the MENU button again to lock in changes.


.

[GO BACK TO TOP OF PAGE]
SECTION TWO:

CPAP Clinician Setup Manuals Available via Direct Download:

These are Adobe PDF files. You will need the free Adobe Acrobat Reader, available for download HERE
If you're not sure which CPAP model you have, please go to our CPAP Pictures Page to identify your machine.

(right click on the manual name, then select 'Save File As...') to save it to your computer:

Respironics REMstar Basic M Series
Respironics REMstar Plus M Series
Respironics REMstar Pro M Series
Respironics REMstar Auto M Series
Respironics REMstar Plus (This older model has 3 buttons on the top, this is not the PR System One, C-Flex nor the M series) - [The 5-button C-flex version is available through email below]
Respironics BiPAP Pro (not the PR System One)
Respironics BiPAP Auto M Series
Respironics REMstar Auto M with A-Flex
Respironics REMstar BiPAP Auto SV
Respironics REMstar LX & LX Plus
Fisher & Paykel SleepStyle600 (setup instructions also cover model 604)
ProBasics ZZZ-PAP
DeVilbiss Horizon LT 8000 series(older, pre-1999 unit)

Please Keep Reading



.

[GO BACK TO TOP OF PAGE]
SECTION THREE:

CPAP Clinician Setup Manuals Available via Email:


ResMed Manuals:
ResMed AirMini AutoSet
ResMed AirStart 10 CPAP
ResMed AirStart 10 APAP
ResMed Air10 Lumis 100 VPAP S
ResMed Air10 Lumis 100 VPAP ST
ResMed Air10 Lumis 150 VPAP ST
ResMed AirSense 10 AutoSet
ResMed AirSense 10 AutoSet for Her
ResMed AirSense 10 Elite
ResMed AirSense 10 CPAP
ResMed AirCurve 10 VAuto
ResMed AirCurve 10 S
ResMed AirCurve 10 ST
ResMed AirCurve 10 ST-A
ResMed AirCurve 10 ASV
ResMed AirCurve 10 CS PaceWave Adaptive Servo-Ventilator
ResMed (S9-Series) Lumis Tx Hospital Ventilator
ResMed S9 VPAP COPD Noninvasive Ventilator
ResMed Stellar 150 Invasive & Noninvasive Ventilator
ResMed Stellar 100 Invasive & Noninvasive Ventilator
ResMed Elisée 150 Li-Ion Ventilator
ResMed Astral 100
ResMed Astral 150 Ventilator
ResMed S9 AutoSet
ResMed S9 Elite
ResMed S9 Escape Auto
ResMed S9 Escape
ResMed S9 VPAP Auto
ResMed S9 VPAP ST
ResMed S9 VPAP S
ResMed S9 VPAP ST with iVAPS
ResMed S9 VPAP ST-A
ResMed S9 VPAP ST-A with iVAPS
ResMed S9 VPAP Adapt
ResMed S9 VPAP Adapt with ASV
ResMed S9 AutoSet CS
ResMed S9 AutoSet CS-A Adaptive Servo-Ventilator
ResMed S8 AutoSet II
ResMed AutoSet T
ResMed AutoSet Spirit
ResMed S8 AutoSet Vantage
ResMed S8 Escape
ResMed S8 Escape II
ResMed S8 Compact
ResMed S8 Elite
ResMed S8 Elite II
ResMed S7 Elite
ResMed CPAP S6 Lightweight, Plus & Elite (combined manual)
ResMed C-Series Tango
ResMed Sullivan V
ResMed Sullivan V Lightweight, Plus, & Elite (combined manual)
ResMed VPAP Auto (not the S9 series)
ResMed VPAP Tx
ResMed VPAP IV and ResMed VPAP IV-ST (combined manual)
ResMed VPAP III & III-ST
ResMed VPAP III ST-A
ResMed VPAP Adapt SV
ResMed VPAP Auto 25 & VPAP ST & VPAP S (combined manual, not the S9 series)
Note: the ResMed 'VPAP Auto 25' is also known as the 'S8 Auto 25' outside the U.S.

For the free ResScan and OSCAR series, not the 'PR System One')
Respironics REMstar Pro 2 (not the 'M' series, not the 'PR System One')
Respironics REMstar Plus with C-flex (has 5 buttons on top, not the 'M' series, not the 'PR System One')
Respironics BiPAP Auto-M Series
Respironics BiPAP Auto with Bi-flex (not the 'M' series, not the 'PR System One')
Respironics BiPAP ST (older pre-2004 version)
Respironics BiPAP ST (grey-colored, 2005-2008 version)
Respironics BiPAP ST with AutoTrak
Respironics BiPAP ST (newer, 'PR System One' model)
Respironics BiPAP AVAPS
Respironics BiPAP Harmony S/T
Respironics Lifecare PLV-100
Respironics BiPAP AutoSV (Complete Manual, not the PR System One version)
Respironics BiPAP AutoSV Advanced (Complete Manual, not the PR System One version)
Respironics Auto M Series with A-flex (complete manual, not just Setup Guide)
Respironics REMstar Auto (not the 'M' series, not the PR System One)
Respironics REMstar Auto with C-flex (not the 'M' series, not the PR System One)
Respironics REMstar Auto M / REMstar Pro M (Complete manuals, not just the setup - Combined Manual covers both machines)
Respironics BiPAP Vision Ventilatory Support System
Respironics Tranquility Bi-Level
DeVilbiss Manuals:
DeVilbiss IntelliPAP AutoAdjust
DeVilbiss IntelliPAP AutoAdjust with SmartFlex
DeVilbiss IntelliPAP Standard
DeVilbiss IntelliPAP Bilevel
DeVilbiss IntelliPAP 2 AutoAdjust
DeVilbiss IntelliPAP 2 Standard Plus
DeVilbiss SleepCube AutoAdjust
DeVilbiss SleepCube AutoAdjust with SmartFlex
DeVilbiss SleepCube Plus
DeVilbiss SleepCube Bilevel
DeVilbiss SleepCube Standard
Puritan Bennett Manuals:
Puritan Bennett Sandman Auto
Puritan Bennett Sandman Intro
Puritan Bennett Sandman Info
Puritan Bennett Sandman Duo
Puritan Bennett Sandman Duo ST
Puritan Bennett GoodKnight 420g
Puritan Bennett GoodKnight 420e APAP
Puritan Bennett 425 Bilevel
Puritan Bennett KnightStar 330 Bi-Level
Puritan Bennett GoodKnight 418A and 418P (combined manual)

Fisher & Paykel Manuals:

Fisher & Paykel SleepStyle 200 Auto (for 200 series Autos, including HC254)
Fisher & Paykel ICON Auto (silver/grey in color)
Fisher & Paykel ICON Premo (silver/grey in color)
Fisher & Paykel ICON Novo (silver/grey in color)
Fisher & Paykel ICON+ Auto (brown in color)
Fisher & Paykel ICON+ Premo (brown in color)
Fisher & Paykel ICON+ Novo (brown in color)

Other Manuals:

SEFAM Dreamstar Auto
SEFAM Dreamstar Info
SEFAM Dreamstar Intro
SEFAM Dreamstar Auto Evolve
SEFAM Dreamstar Info Evolve
SEFAM Dreamstar Intro Evolve
SEFAM Dreamstar Duo
SEFAM Dreamstar DuoST
SEFAM Dreamstar Duo Evolve
SEFAM Dreamstar DuoST Evolve
Apex iCH Series CPAP
Apex iCH Series Auto
Apex XT Fit CPAP
Apex XT Auto CPAP
Apex XT Sense CPAP
Breas Medical HDM Z1 CPAP
Breas Medical HDM Z1 Auto CPAP
Breas Medical HDM Z2 Auto CPAP
BMC 3B Products RESmart CPAP
BMC 3B Products RESmart Auto-CPAP
BMC 3B Products Luna CPAP (Setup Guide)
BMC 3B Products Luna Auto-CPAP (Setup Guide)
InnoMed-Aire CPAP
AEIOmed Everest 2 CPAP (Patient & Clinician Quickstart Guide)
AEIOmed Everest 3 CPAP (Complete Clinician Manual)
Invacare Polaris EX with-SoftX
Breas iSleep 20i
Weinmann SOMNObalance (e) autoCPAP & SOMNOsoft 2 (e) CPAP (combined manual)
Vega Technologies Vega CP-03 CPAP
Ventmed CPAP
Ventmed Auto CPAP
Ventmed BiPAP ST25
Ventmed BiPAP ST30
Yuwell YH-580 Auto-CPAP
Yuwell BiPAP (models YH-360, YH-560, YH-580, YH-720, YH-725, YH-730, & H-03)

.

[GO BACK TO TOP OF PAGE]
HOW TO ASK FOR A MANUAL VIA EMAIL:

Note: Apnea Board will not give your email address to third parties


If you would like one of the manuals listed above, please send an email to: This email address is being protected from spambots. You need JavaScript enabled to view it. and put 'Setup Manual' (without the quotes) in the subject line. Then, let us know in the body of your email which of the listed manuals you would like us to email to you. It is best if you copy the exact manual name from the above list and paste it into your email to make sure you receive the correct manual.

LIMIT: Two (2) Clinician Manuals per individual.
(If you request more than two manuals, your request will be discarded)

Your manual should then be sent to you within a day or two (we try to send out manuals daily, except around holidays). Keep in mind- these files are very large- your email provider must be able to receive files up to and including 13 MB (megabytes) in size for this to work. If you need a free email account that will handle large file sizes, we suggest Gmail. If you have not received your file in a few days, you may wish to check your 'junk email' folder - since we're sending a large file, sometimes our emails get marked incorrectly as 'junk mail'.
Please check carefully -
If your CPAP is not on the above list, we do not have a manual for it, so you may wish to post a request in the forum to see if anyone else has a copy they can email to you.

Note to REMstar Auto, REMstar Pro & REMstar Plus owners:
When requesting a manual, in addition to your model type, please tell us whichREMstarseries you have, according to this picture:

If you're not sure which CPAP model you have, please go to our CPAP Pictures Page to identify your machine.

Attention Medical Professionals & Employees of Commercial Entities:
We send manuals free-of-charge to individual Sleep Apnea patients for their own personal educational use.
If you work for a commercial entity or are employed by a medical facility, please read our CPAP Manual Distribution Policy.
Please Keep Reading
Please note: Some of these manuals contain only the 'clinician setup pages', not the entire manual. If the links above or email file sent to you has only the setup pages, that is all we have for your machine, unfortunately.
Can't find your manual here?Suggestion: If you're trying to change your CPAP pressure but don't find your manual listed, try following the instructions for another machine made by the same manufacturer - in some cases, the procedure for getting into the clinician setup menu is the same. If you're not sure which CPAP model you have, please go to our CPAP Pictures Page to identify your machine.

For a detailed explanation of how to determine the optimum pressure on your CPAP machine, click here.
There you have it. Take control of your Sleep Apnea, and be safe.
Thanks for visiting Apnea Board!
Please send us your manual: If you have a setup manual or instructions on how to enter the setup menu for a machine we don't have listed here, please help us, and email it to This email address is being protected from spambots. You need JavaScript enabled to view it. and we will make sure it gets posted here. Thanks!
Click HERE to go to the Apnea Board Forums
Click HERE to learn about our Members-Only Files Page
(This page includes CPAP Service 'Repair' Manuals, plus other files of interest to Sleep Apnea patients).

This web page was last updated on: November 11, 2019

For our current update history, beginning in 2012, click here
We need your help
If you can, please donate a couple of dollars to Apnea Board by clicking on the 'Donate' button below:



Go back to Apnea Board
© Copyright www.ApneaBoard.com
Privacy Policy